Government, Federal, State
and Military
Our products allow several
independently operable padlocks to be used on almost any shared
access portal, including gates, doors, cabinets etc to provide
secure shared access for all users. Tayhope Enterprises Ltd are the
inventors, manufacturers and sole worldwide suppliers of these
products.
Please find detailed below
a guide to our basic product range along with product serial
numbers. We also design and supply problem specific solutions to
shared access, please contact
us for further details or to discuss a specific
requirement.
|
SN: 05-BC
|
|
5 Padlock
Multi-Lock with bolt-on catch
For
1 to 5 padlocks.
Stainless Steel with through hardened alloy steel padlock pins.
All parts included except fixing bolts.
|
| |
SN: 05-CC |
|
5 Padlock Multi-Lock with chain
catch
For 1 to 5 padlocks.
Stainless Steel with through hardened alloy steel padlock pins.
8mm marine grade stainless chain. All parts included except fixing
bolts.
|
| |
SN:
05-TK |
|
5 Padlock Multi-Lock for tubular
frames
For 1 to 5 padlocks.
Similar to 05-CC but with additional brackets and bolts to clamp
the Multi-Lock onto tubular, CHS or Pipe frames. Note this product
does not have the standard mounting bracket
|
| |
|
|
|
Dual Padlock Multi-Lock
Suitable for two padlocks, formed from Stainless Steel with
through hardened 3/8” alloy steel shackle.
SN: 02-ST
Short shackle 12 mm aperture
SN: 02-SO
Short shackle 14 mm aperture
SN: 02-LT
Long shackle 12 mm aperture
SN: 02-LO
Long shackle 14 mm aperture
|
| |
SN: 10-BC |
|
10 Padlock Multi-Lock with bolt-on
catch
For 1 to 10 padlocks.
Stainless Steel with through hardened alloy steel padlock pins.
All parts included except fixing bolts.
|
| |
SN: 10-CC |
|
10 Padlock Multi-Lock
For 1 to 10 padlocks.
Stainless Steel with through hardened alloy steel padlock pins.
8mm marine grade stainless chain. All parts included except fixing
bolts.
|
| |
SN: 10-TK |
10 Padlock Multi-Lock for tubular
frames
For 1 to 10 padlocks.
Similiar to 10-CC extra brackets and bolts to clamp the
Multi-Lock to tubular, CHS or Pipe frames. Note this product does
not have the standard mounting bracket
|
| |
|
|
|
5 and 10 Padlock Shield
Suitable for 5 or 10 padlock Multi-Locks, formed from Stainless
Steel.
SN:
05-SH5 Padlock
shield
SN: 10-SH
10 Padlock
shield
|
